Build 8. Headlights Part 2

Attaching them was a bit more involved than I wanted them to be. Basically the VERY limited gap between the chassis, the IVA trim and the aluminium was so small it required quite a bit of effort on one side to get it seated correctly. Made worse was the fact it kept pulling the IVA trim though with it, which would be an IVA fail, so this too a lot of persistence to get right. once in place it was very simply to just tighten up the bolts.

I hope I never have to adjust this part again!

Update after build: I did have to adjust them after the IVA as they were dazzling other drivers, it wasn't a huge task though, I may add it to the blog later under upgrades.